Cables

6' -EL x 8' -AZ Encoder Cable for Sky Commander XP4 By Sky Engineering

Standard 6' -EL x 8' -AZ encoder cable for the Sky Commander XP4 computer.

$15.00

Reflex Cable for Canon EOS (1) DSLR Cameras By LVI Cameras

The REFLEX section managed by the MGA device controls a variety of Canon, Nikon, Pentax and Sony cameras by handling the same parameters that are usually managed by commercial software.

$15.00

Advanced Focuser Control Cable By LVI Cameras

The FOCUSER section managed by the MGA device takes control of all Baader Steeltrack and Starlight Instruments FeatherTouch focusers when their dedicated motor drives (to be purchased separately) are plugged in. The MGA supplies power to the motor through 3xAA batteries placed inside the MGA unit.

$15.00

Cable for ALLOS Control Unit and EM/NJP Control Port By FILOS

Optional cable running between the ALLOS control unit and the Takahashi EM/NJP control port (port that is normally connected to the Tak hand controller). By using this cable, the user can control guiding as well as mount speed via the shift keys S1 and S2.

$17.00

AutoStar #497 Autoguiding Cable for MGA Unit By LVI Cameras

The advanced and opto-coupled autoguiding port in the MGA unit enables non-simultaneous corrections to the RA and DEC axes useful to achieving perfect autoguiding. A dedicated AUTOSTAR port enables autoguiding through all Meade mounts with AutoStar #497 controller (LX90, LXD55/75, ETX Series).

$18.00

LX200 / RCX400 Autoguiding Cable for MGA Unit By LVI Cameras

The advanced and opto-coupled autoguiding port in the MGA unit enables non-simultaneous corrections to the RA and DEC axes useful to achieving perfect autoguiding. The cable connects to the Autoguiding port on the LX200 mount drive and the MGA unit.

$18.00

#507 Cable Connector Kit for LX200 Scopes By Meade

LX200 Interface Cable - for all models of LX200s ONLY.

$19.00

RS-232 Cable for Sky Commander By Sky Engineering

RS-232 cable to interface the Sky Commander computer to a PC. (18 feet in length).

$20.00

Reflex Cable for Canon EOS (2) DSLR Cameras By LVI Cameras

The REFLEX section managed by the MGA device controls a variety of Canon, Nikon, Pentax and Sony cameras by handling the same parameters that are usually managed by commercial software.

$20.00

#505 Connector Cable Set for #497 Autostar Controller By Meade

Allows you to connect any AutoStar #497 telescope to a PC.

$24.00

Reflex Cable for Nikon DSLR Cameras By LVI Cameras

The REFLEX section managed by the MGA device controls a variety of Canon, Nikon, Pentax and Sony cameras by handling the same parameters that are usually managed by commercial software.

$27.00

Reflex Cable for Sony DSLR Cameras By LVI Cameras

The REFLEX section managed by the MGA device controls a variety of Canon, Nikon, Pentax and Sony cameras by handling the same parameters that are usually managed by commercial software.

$27.00

15’ 2.0 USB Cable By Meade

Designed for use with Meade’s new Deep Sky Imager (DSI) and Lunar Planetary Imager (LPI). This is a longer USB cord to image while indoors.

$29.00

mySKY Cable Set By Meade

Use this 24" coiled cord to interface the mySKY to any AutoStar configuration or LX200 Classic.

$29.95

Vixen GP2, GP-D2, Sphinx, Sphinx-D, Atlux Autoguiding Cable By LVI Cameras

The advanced and opto-coupled autoguiding port in the MGA unit enables non-simultaneous corrections to the RA and DEC axes useful to achieving perfect autoguiding.

$30.00

Takahashi Temma-2 Autoguiding Cable By LVI Cameras

The advanced and opto-coupled autoguiding port in the MGA unit enables non-simultaneous corrections to the RA and DEC axes useful to achieving perfect autoguiding.

$30.00

36" Coiled Power Cord 12V (Losmandy GM8/G11 (non-Gemini) Celestron, Orion, Sky Watcher) By Kendrick

36" coiled (15' extended) 12 volt power cord for Celestron, Orion, Meade, Skywatcher and Non-Gemini Losmandy Mounts. These have a cigarette lighter plug on one end and the CDC power plug on the other end.

$35.00

USB to RS-232 Bridge Cable By Meade

Allows you to use #505 or #506 cables to connect to a USB port. Driver software included. Windows 98, ME, 2000 and XP compatible.

$39.00

#506 Cable Connector Kit w/Software for ETX-60/70/80 By Meade

#506 AstroFinder Software & Cable Connector Kit for ETX-60, 70 and 80.

$45.00

#505 Cable Connector Kit w/Software By Meade

#505 AstroFinder Software and Connector Cable Kit for use with #497 AutoStar controller (ETX-90/105/125). Allows you to connect any AutoStar #494 telescope to a PC. Operate your telescope from your PC or Macintosh, download updates, create custom tours and more!

$49.00