CCD Accessories

Molecular Sieve Refills for DRP (10 Pack) By Farpoint Astro

Package includes 10 molecular sieve desiccant packs (3 grams per pack) which allows 10 recharges. For the Desiccant Replacement Plug for SBIG CCD cameras.

$9.00

IFW Filter Wheel Replacement O-ring By Optec (CCD Photo Accessories)

IFW filter wheel replacement O-ring, 3-pack.

$12.00

ST-7RC Adapter Plug By SBIG

This adapter is supplied with all "ST" series cameras. It plugs into the 9 pin "AO/CFW/SCOPE" port on an ST-7/8/9/10/2000 camera and accepts an RJ-11 to RJ-11 Tracking Cable that connects the camera to your telescope drive's autoguider ("CCD") port. This adapter plug is not required when using a CFW8A.

$12.50

Dual Relay Cable By SBIG

This ribbon type extension cable with additional ports is also supplied with an AO-7 so that an "ST" series camera can control a CFW8A, telescope drive and AO-7 all at the same time. This cable is provided with every AO-7 as a convenience, however for permanent use the more robust Port Splitter accessory should be used.

$18.00

Tracking Cable By SBIG

RJ-11 to RJ-11 modular 6-conductor cable used for guiding. Supplied with all ST Series cameras.

$18.00

MaxCam CM2-1 Interface Cable By Finger Lakes Instruments (CCD)

Interface cable for MaxCam CM2-1. Fifteen feet long, 10-pin RJ-45 to 10-pin RJ-45.

$18.75

T-Thread Adapter for 2" Multiple Filter Selector By Lumicon

Optional T-Thread Adapter for photographic use with 2" Multiple Filter Selector to maintain low profile.

Note: Some Newtonians and short focal length Refractors may have trouble reaching focus with this accessory.

$24.95

L Mounting Bracket By Optec (CCD Photo Accessories)

L mounting bracket with 1/4 -20 thread. This L shaped bracket sllows the Pyxis to be mounted on a side support or optical bench.

$25.00

Special T-Adapter for CCD attachment to SCT rear cell By Meade

Special T-Adapter for CCD attachment to SCT rear cell

$26.00

Threaded Aperture Cap for STL Cameras By SBIG

This cap is machined from solid aluminum and black anodized.It is threaded to fit the 2.1" aperture of STL cameras to prevent dust from entering the filter wheel cover when the 2" nosepiece is not attached.

$29.00

Canon Wide T Adapter for 2.4" Focuser By TeleVue

Canon Wide T Adapter. Mates Canon T-rings with Imaging System accessories. Eliminates the inner portion of Canon T-rings to provide a larger diameter opening for reduced vignetting.

$35.00

SBIG STL Camera Adapter for 2.4" Focuser By TeleVue

SBIG STL-11000 Camera Adaper. This adapter is sized to thread directly onto the STL-11000 and mates with Imaging System accessories.

$35.00

Standard T-ring Adapter for 2.4" Focuser By TeleVue

Standard T-ring adapter. This is the most restrictive of adapters as it has the smallest inside diameter. Recommended for use with APS size or smaller chips.

$35.00

Test Lens for ST-7/8/9/10/2000 CCD Cameras By SBIG

SBIG Accessory Lens for ST-7/8/9/10/2000 CCD Cameras.
This inexpensive test lens allows the user to become familiar with CCD Camera operation and software in the comfort of his home, without a telescope. If one just sets the camera-lens combination outside on the gournd looking up, images of the constellations can be taken up to 10 sec long before elongation occurs.

$37.50

12V DC Power Cord for ST402ME By SBIG

12v power cord designed specifically for the ST402 camera. Has a cigarette lighter plug as well as clips for easy attachment to your 12v source.

$39.00

T-Thread to C-Mount Adapter By SBIG

T-Thread to C-Mount Adapter

$40.00

CCD Adapters to use 2.7" or 4" Field Flattener with the SBIG ST-8/ST-10 and Fingerlakes Instruments By Astro-Physics

Astro-Physics CCD Adapters to use 2.7" or 4" Field Flattener with the SBIG ST-8/ST-10 and Fingerlakes Instruments Cameras.

$40.00

2"/T-2 Tapered Nosepiece for CCD Cameras By Astro-Physics

2"/T-2 Tapered Nosepiece for CCD Cameras, SBIG ST7, Baader Planetarium Giant Binocular Viewer or any item with T-2 threads.

$40.00

Visual Adapter for FSQ-106 By Takahashi

Visual adapter for the FSQ-106.

$40.00

Accessory Tube for 2.4" Focuser - 0.250" By TeleVue

0.25" (6.4mm) spacer. Threaded coupling provides the necessary distance for proper spacing of filed lenses to the chip. Required spacers will vary depending on camera specifications. Black anodized aluminum with anti-reflection threads for maximum contrast.

$40.00