Every major component of the ProLine is CNC machined to ensure a long life in the most demanding conditions. The ProLine base / heat sink, shutter housing and front flange are each machined from a single piece of high grade aluminum. (Being part of the base assembly, even the ProLine fan cover is CNC machined!) The electrical printed circuit boards use only the highest quality components and are protected from harsh environment without the need for conformal coatings (Dual Sealed Chambers).
Dual Sealed Chambers
The ProLine features a unique dual sealed chamber system. Both the camera electronics and sensor are located in separate sealed chambers to keep moisture out and the camera's dry noble gas in! Improving upon the highly successful MaxCam sealed camera design, the ProLine avoids environmentally related failures that are common in humid environments.
Fast, Adjustable Download Speeds
Breaking new ground in download speeds, the ProLine provides the user with extremely fast user-selectable download speeds. You can operate at up to 12 megapixels/sec. for focusing. This means that an unbinned PL11002 image can be downloaded to your PC in as little as 0.9 sec for focusing. For imaging, the download time can be increased to dramatically reduce the noise in the final image.
The ProLine achieves a 60°C - 70°C cooling performance. Customers may select from an air-cooled or (optional) liquid cooled base. In either operation, our robust cooling performance ensures low dark current and its attendant noise. Unlike competitive products, FLI measures cooling performance from ambient air temperatures, not camera base temperatures! No special cooling sequence staging is required. Simply set the ProLine cooling where you want it and the camera will do the rest - quickly and without worries.
Internal Frame Buffer
Conventional imaging cameras move the image data directly from the image sensor to the USB port, making them susceptible to added artifacts due to PC processing tasks, processor speed, and other PC-related artifacts. By providing memory internal to the camera, the imaging chip is quickly read out to the memory and downloaded to the PC form there. This allows the PC to take the image at whatever speed the PC is capable, without introducing any artifacts.
Accurate Sensor Placement
Through sophisticated design and production techniques, your image sensor is accurately aligned so that the imaging chip is perpendicular to the optical path without shims or other post-assembly adjustments. This is crucially important as chips get larger to insure the entire frame of your image is in focus. Although not required by some applications, we also accurately control the 'X,Y' location of the sensor so that it is square to the camera body.
Our policy is to provide the highest level of Customer Support possible. Should you encounter a problem with your FLI product, you can expect a quick and effective response. Our Customer Support Policy holds true for new, used and out of warranty products.
|PL16801 Sensor Specs
||ON Semi KAF-16801
||4096 x 4096
|Full Well Capacity:
|Video Size (inch):
Camera Spec Sheet:
||1 MHz, 8 MHz
|Typical System Noise:
||9 e- RMS @ 1 MHz
|Typical Maximum Cooling:
||55ºC Below Ambient
|Typical Dark Current:
||Optional Nikon F-Mount or Canon EOS mount
|All ProLine Cameras
||6.2 x 6.2 x 3.8 (157.48 x 157.48 x 96.52)
|Focal Plane to Faceplate:
||21.3 mm (optical)
||5.6 lbs. (Liquid Cooled - 4.6 lbs.)
||12V (100-240V AC to 12V DC power supply included). With TEC off:
||-30ºC - 45ºC | 10% - 90% Relative Humidity